Products
Products
Contact Us
Shenzhen ARISE Optoelectronics Co., Ltd
Contact person: Mr. Xia
Tel：15986732798
Address: 2nd Floor, Building C, No. 1 Tianliao Tiankuo Road, Yutang Street, Guangming District, Shenzhen
T8-RG150-204
Eetail Price
Weight
kg
inventory
隐藏域元素占位
-
Detailed
Heating radiation area
1*2.4m (2 pieces)
power requirement
≤175W (heat radiation downward)
temperature requirement
25~30cm from the ground, the temperature can reach 32-35℃
temperature rise
Temperature rise 10°C~15°C (20~30cm from the ground)
Warm lamp height requirements
The overall height does not exceed 12 cm (including the protective net)
Temperature requirements on the back of the warm lamp shade
The temperature on the back side does not exceed 60°C (the lower the better), to prevent the high temperature on the back side from igniting the PP material on the back side
gear design
High - Low - Off
protection net
A protective net needs to be installed at the bottom of the warm lamp
cable length
1 meter
Tube length
118±2mm
Lamp Life Requirements
≥10000 hours
Infrared Radiation Conversion Efficiency
≥60%
High pressure performance
220V can load 120% without being burned
Water jet resistance
It should not burst when it encounters cold water when it is ignited
security requirements
The temperature rise at both ends of the lamp tube is not higher than 185K
waterproof level
IPX4
Pressure regulation
With pressure regulating function
a fixed way
Use a stainless steel spring buckle (safety buckle) with a diameter of about 35mm and an inner diameter greater than 25mm for fixing (installed on the warm lamp)
The distance between two stainless steel spring buckles is: 100mm
☑ Cutting-edge light distribution design
☑ Reasonably control the distribution of light, ensure the ideal brightness and uniformity of light, eliminate the glare of LED, and make the LED light energy utilization to the best, eliminate light pollution.
☑ Scientific lens and lampshade integrated design
☑ The lens certification system serves both as a focusing and protective function, avoiding repeated waste of light, reducing light loss, and also reducing the weight of the product. The structure is simplified, making the product lighter and more convenient for installation (it can be easily fixed by adding a buckle).
☑ Integrated design of radiator lamp housing
☑ Fully ensuring the heat dissipation requirements and lifespan of LED lighting fixtures, fundamentally meeting the structure and arbitrary design of LED lighting fixtures, with distinctive characteristics of LED lighting fixtures.
☑ Intelligent current detection and control
☑ Each LED module implements intelligent control, ensuring precise constant current in any abnormal situation, ensuring that the LED beads work under safe current.
☑ No adverse glare
☑ Eliminating the glare, visual fatigue, and line of sight interference caused by the poor glare of ordinary light tubes provides excellent protection for vision.
☑ No high-pressure safety, no dust absorption
☑ Eliminated the annual decrease caused by the blackening of the lampshade of ordinary lamps due to high-pressure absorption of dust.
☑ No high-temperature lampshade, no aging or yellowing
☑ Avoiding the brightness reduction and shortened lifespan caused by aging and yellowing of ordinary lamps due to high-temperature baking of the lampshade.
☑ Start without delay
☑ When powered on, it reaches normal brightness, eliminating the prolonged start-up process of ordinary light tubes.
☑ No flash protection for eyes
☑ Pure DC operation eliminates visual fatigue caused by traditional light flashing.
☑ Stamping has strong seismic resistance and no ultraviolet (UV) and infrared (IR) radiation
☑ No filament or glass cover, no problem of traditional lamp breakage, no harmful noise to the human body, no harm to the human body, and no radiation.
☑ High color rendering index
☑ The presentation of colors is more realistic and vibrant.
☑ Multiple color temperature options available
☑ Being able to meet the needs of different occasions for color temperature and color (low sodium lamp color temperature and high mercury lamp color temperature can cause mild hypnosis and depression), making observers feel more comfortable in different environments.
☑ There are no harmful substances in the green and environmentally friendly pipes, and waste can be recycled and reused
☑ It does not contain lead or toxic elements (traditional lamps contain some toxic elements due to their luminous principle), and does not cause any pollution to the environment. Scrapped LED products are also recycled and reused
☑ Ultra long lifespan of over 50000
☑ LED adopts advanced packaging technology with high reliability, fully ensuring its ultra long lifespan to be 5-10 times that of traditional sodium and mercury lamps.
☑ Global wide input voltage
☑ 85-265VAC full voltage range constant current, PWM control, high efficiency, low heat, and precise constant current.
☑ No pollution to the power grid
☑ The power factor is greater than 0.9, the harmonic is less than 20%, and the EMI meets global indicators, reducing transmission line losses and avoiding high-frequency interference pollution to the power grid.
☑ Low heat and low working voltage, safe and reliable
☑ The LED junction temperature is controlled at an ideal temperature of 60 ℃, and the operating voltage of the LED module is below 36V, ensuring safety and reliability.
☑ The Best Choice for Combining with Solar Energy
☑ Fully leveraging the advantages of LED low voltage operation and energy conservation and environmental protection, according to the local solar energy resource situation, it is possible to combine municipal electricity with solar power supply to achieve the best cost-effectiveness and high reliability for customers.
☑ High light efficiency
☑ The luminous efficiency of LED under existing conditions is greater than 85LM/W. The actual efficiency of lamps is 3-5 times that of ordinary fluorescent lamps, 8 times that of ordinary incandescent lamps, and 4 times that of high-pressure sodium lamps. With the rapid improvement of LED brightness, when the luminous efficiency reaches 160LM/W, the 400W sodium lamp will be replaced by the 100W LED lamp.Feature
☑ Energy saving and environmental protection, free from UV, infrared, and mercury pollution, meeting UL certification requirements;
☑ Aluminum profile+high-quality PC mask, with strong impact resistance and soft light that does not sting the eyes;
☑ High transmittance mask, uniform light emitting surface, no dark spots, no LED light source particle sensation;
☑ Adopting special packaging and heat dissipation processes, high stability for continuous operation;
☑ Can be frequently switched on and off, without flickering or glare, with good color rendering performance;
☑ The world's first metal lamp holder, which can rotate 90~180 ° -
Parameter
Basic Features
total power
22±1W
Input voltage
85V-265V/50/60Hz
The output voltage
72v
Output current
275mA
Power Factor
≥0.90
Power Efficiency
≥90%
Luminous flux index
Diffusion ≥ 2420Lm
Beam angle
120
type of light source
2835
Lamp material
Aluminum alloy+PC
power installation
Built-in isolated constant current power supply (single-ended input)
Light-transmitting cover
PC, light transmittance 85%
Tube size
A:1498mm B:1513mm C:26mm
Packing
paper tube
degree of protection
IP20
glow color
warm white, natural white, pure white
Relevant certification
CE ROHS TUV SAA
-
More details
-
Related products
Previous
Next
-
Contact person: Mr. Xia
Tel：15986732798
Q Q：905822047 -
Address: 2nd Floor, Building C, No. 1 Tianliao Tiankuo Road, Yutang Street, Guangming District, Shenzhen
Website QR code
Copyright © 2023 Shenzhen Airuisi Optoelectronics Co., Ltd
Powered by www.300.cn
SAF Coolest v1.2 设置面板 UZVSX-ZABF-UXSSE-ZXA
无数据提示
Sorry, there is currently no content in the current column!
You can view other columns or return to HOME