Products
Products
Contact Us
Shenzhen ARISE Optoelectronics Co., Ltd
Contact person: Mr. Xia
Tel：15986732798
Address: 2nd Floor, Building C, No. 1 Tianliao Tiankuo Road, Yutang Street, Guangming District, Shenzhen
T8- Radar Induction Lamp Series
Eetail Price
Weight
kg
inventory
隐藏域元素占位
-
Detailed
Heating radiation area
1*2.4m (2 pieces)
power requirement
≤175W (heat radiation downward)
temperature requirement
25~30cm from the ground, the temperature can reach 32-35℃
temperature rise
Temperature rise 10°C~15°C (20~30cm from the ground)
Warm lamp height requirements
The overall height does not exceed 12 cm (including the protective net)
Temperature requirements on the back of the warm lamp shade
The temperature on the back side does not exceed 60°C (the lower the better), to prevent the high temperature on the back side from igniting the PP material on the back side
gear design
High - Low - Off
protection net
A protective net needs to be installed at the bottom of the warm lamp
cable length
1 meter
Tube length
118±2mm
Lamp Life Requirements
≥10000 hours
Infrared Radiation Conversion Efficiency
≥60%
High pressure performance
220V can load 120% without being burned
Water jet resistance
It should not burst when it encounters cold water when it is ignited
security requirements
The temperature rise at both ends of the lamp tube is not higher than 185K
waterproof level
IPX4
Pressure regulation
With pressure regulating function
a fixed way
Use a stainless steel spring buckle (safety buckle) with a diameter of about 35mm and an inner diameter greater than 25mm for fixing (installed on the warm lamp)
The distance between two stainless steel spring buckles is: 100mm
Radar sensing uses the principle of the Doppler effect to transmit electromagnetic waves through a planar antenna. When a moving object enters the environment of electromagnetic waves, the waveform is reflected back. When the planar antenna receives the feedback waveform, the subsequent circuit detects the trigger signal to work. Thereby producing a bright/slightly bright double brightness effect, the comprehensive weighted power is only 5-6W, and the energy saving effect is more than 85% compared with ordinary fluorescent lamps. The life span is greatly extended. Compared with the human body pyroelectric induction and sound control induction, the induction distance is farther , wider angle, no dead zone, can penetrate glass and thin wood, not affected by the environment, temperature, dust, etc., the sensing distance will not be shortened at 37 degrees. With fast reflection speed and good concealment, the radar sensor LED fluorescent lamp is the best lighting fixture for the underground garage.
Features
☑ T8 sensor lamps are mainly open to underground parking lots. Using imported LED light sources and independent intelligent control technology, they can fully provide sufficient lighting for car owners to drive out of the underground garage quickly and safely. When there is no vehicle entering or leaving, it will automatically switch to power-saving Lighting status, providing sufficient lighting for monitoring.
☑ The power consumption of long-term operation is only equivalent to 10% of the power consumption of traditional lighting, so as to achieve the effect of "lighting on and saving power". -
Parameter
Model List List of Models
Color temperature (CCT)
T8 microwave induction lamp
Natural white
6000-6500K
Limit parameter Absolute maximum ratings
Parameter Parameter
Value Value
unit unit
Input voltage Input voltage
90 to 265
IN
Ambient temperature Ambient temperature
-20 to +50
℃
Operating relative humidity
30 to 85
%
Storage Temperature Storage Temperature
-25 to +60
℃
Lamp body length Tube length
1200(Max)
mm
Tube diameter Tube diameter
Ellipse 25.8*30.5(Max)
mm
Electrical characteristicsElectrical characteristics
Parameter Parameter
Minimum valueMin
Typical valueTyp
Max
unit unit
Condition
Input PowerInput Power
17.5
18
18.5
IN
Ta=25℃
Input Current Input Current
-
0.082
-
A
Power frequencyPower frequency
-
50/60
-
Hz
Power factor Power factor
-
>0.93
-
Light source parameters Light source parameters
Parameter Parameter
Minimum valueMin
Typical valueTyp
Max
UnitUnit
Condition
Color temperature CCT
K
Ta=25℃
Natural white
5500
6000
6500
k
k
Initial Luminous flux Initial Luminous flux
1800
1850
1900
lm
Color Rendering Index Color Rendering Index
80
Luminous efficiency
-
≥100
-
LM/W
Viewing angle at 50% Iv
-
120°
-
2θ1/2
Other parameters Other parameters
Parameter Parameter
Minimum valueMin
Typical valueTyp
Max
UnitUnit
Condition
Static Power Static Power
2
3.5
4
IN
Delay Time Delay Time
18
20
25
s
Sensing distance Sensor Distance
6
8
10
m
Max Temperature Rise
30
35
40
℃
-
More details
Light distribution curveLight distribution curve
Product size chart Product size
-
Related products
Previous
-
Contact person: Mr. Xia
Tel：15986732798
Q Q：905822047 -
Address: 2nd Floor, Building C, No. 1 Tianliao Tiankuo Road, Yutang Street, Guangming District, Shenzhen
Website QR code
Copyright © 2023 Shenzhen Airuisi Optoelectronics Co., Ltd
Powered by www.300.cn
SAF Coolest v1.2 设置面板 UZVSX-ZABF-UXSSE-ZXA
无数据提示
Sorry, there is currently no content in the current column!
You can view other columns or return to HOME