• image1(6).jpg

Circular three proof light

Eetail Price

¥ 0.01







  • Detailed

    Heating radiation area

    1*2.4m (2 pieces)

    power requirement

    ≤175W (heat radiation downward)

    temperature requirement

    25~30cm from the ground, the temperature can reach 32-35℃

    temperature rise

    Temperature rise 10°C~15°C (20~30cm from the ground)

    Warm lamp height requirements

    The overall height does not exceed 12 cm (including the protective net)

    Temperature requirements on the back of the warm lamp shade

    The temperature on the back side does not exceed 60°C (the lower the better), to prevent the high temperature on the back side from igniting the PP material on the back side

    gear design

    High - Low - Off

    protection net

    A protective net needs to be installed at the bottom of the warm lamp

    cable length

    1 meter

    Tube length


    Lamp Life Requirements

    ≥10000 hours

    Infrared Radiation Conversion Efficiency


    High pressure performance

    220V can load 120% without being burned

    Water jet resistance

    It should not burst when it encounters cold water when it is ignited

    security requirements

    The temperature rise at both ends of the lamp tube is not higher than 185K

    waterproof level


    Pressure regulation

    With pressure regulating function

    a fixed way

    Use a stainless steel spring buckle (safety buckle) with a diameter of about 35mm and an inner diameter greater than 25mm for fixing (installed on the warm lamp)

    The distance between two stainless steel spring buckles is: 100mm

    ☑ The cutting-edge light distribution design
    reasonably controls the distribution of light, while ensuring the ideal brightness and uniformity of light, it eliminates the glare of LEDs and maximizes the utilization of light energy of LEDs, eliminating light pollution.
    ☑ Scientific integrated design of lens and lampshade.
    The lens cover plays the role of concentrating and protecting at the same time, avoiding the repeated waste of light, reducing the loss of light, and also reducing the weight of the product, simplifying the structure, making the product lighter and thinner, and more Facilitate installation.
    ☑ The integrated design of the radiator and lamp housing
    fully guarantees the heat dissipation requirements and lifespan of LEDs, fundamentally meets the structure and arbitrary design of LED lamps, and has the distinctive features of LED lamps.
    ☑ Intelligent current detection control
    Each LED module implements intelligent control, regardless of any abnormal situation, it can accurately and constant current to ensure that the LED lamp beads work at a safe current.
    ☑ No bad glare
    Eliminate the glare caused by the bad glare of ordinary lamps, visual fatigue and line of sight interference, and protect eyesight very well.
    ☑ No high voltage safety No dust suction
    Eliminates the annual reduction caused by the blackening of the lampshade due to high pressure absorption of dust by ordinary lamps.
    ☑ No high-temperature lampshade will not age and yellow,
    avoiding the reduction of brightness and lifespan caused by the aging and yellowing of ordinary lamps caused by high-temperature baking lampshades.
    ☑ The normal brightness can be reached after power-on without delay
     which eliminates the long-time start-up process of ordinary lamps.
    ☑ No flicker to protect the eyes
    . Pure DC work eliminates the visual fatigue caused by the flicker of traditional lights.
    ☑ Lai stamping has strong shock resistance, no ultraviolet (uv) and infrared (ir) radiation
    , no filament and glass cover, no problem of traditional lamp breakage, no harmful clutter, no harm to the human body, and no radiation.
    ☑ High color rendering index
    makes colors more realistic and vivid.
    ☑ A variety of color temperature and color options
    can meet the color temperature and color requirements of different occasions (the color temperature of sodium lamps that are too low and the color temperature of mercury lamps that are too high will cause slight hypnosis and depression), making observers feel more comfortable in different environments.
    ☑ There are no harmful substances in the green environmental protection tube. The waste can be recycled. It
    does not contain lead and tribute lamp polluting elements (traditional lamps contain some toxic elements because of their luminous principle), and there is no pollution to the environment, and the scrapped LED products can be recycled and recycled

    super Long lifespan More than 50,000
    LEDs adopt high-reliability advanced packaging technology, which fully guarantees the ultra-long lifespan of LEDs, which is 5-10 times that of traditional sodium lamps and mercury lamps.
    ☑ Wide input voltage, universal
    DC12-36VAC full voltage range, constant current, PWM control, high efficiency, low heat, and accurate constant current.
    ☑ No pollution to the power grid.
    The power factor is greater than 0.9, and the harmonics are less than 20%.
    ☑ Low heat and low working voltage, safe and reliable.
    The LED junction temperature is controlled at an ideal temperature of 60°C, and the working voltage of the LED module is below 36V, which is safe and reliable.
    ☑ The best choice to combine with solar energy.
    Give full play to the advantages of LED low-voltage operation and energy saving and environmental protection. According to the local solar resource conditions, it can also combine mains power with solar power to achieve the best cost performance and high reliability for customers.
    ☑ The luminous efficiency of high-efficiency
    LEDs under existing conditions is greater than 85LM/W. The actual efficiency of lamps is 3-5 times that of ordinary fluorescent lamps, 8 times that of ordinary incandescent lamps, and 4 times that of high-pressure sodium lamps. With the rapid increase of LED brightness, when the luminous efficiency reaches 160LM/W, the 400W sodium lamp will be replaced by the 100W LED lamp.


    ☑ Energy saving and environmental protection, no ultraviolet, infrared and mercury pollution, in line with UL certification requirements;
    ☑ Aluminum profile + high-quality PC mask, strong impact resistance, soft light without glare;
    ☑ High light transmittance mask, uniform light emitting surface, no dark spots , no graininess of LED light source;
    ☑ adopts special packaging and heat dissipation technology, high continuous working stability;
    ☑ can be switched on and off frequently, without flickering and glare, and has good color rendering performance;
    ☑ light appearance, novel style, easy to install and transport ;

  • Parameter

    temperature requirement

    25~30cm from the ground, the temperature can reach 32-35℃

    energy saving switch

    With energy saving switch (high-off-low)

    Radiation range

    When the low gear is used, the height from the ground is 200 or 300mm, and the average temperature of the slatted plate directly under the warm lamp is 32-35°C

    Protection net height


    wire length

    1 m



    Regulator function

    With pressure regulating function


    Designated Remark waterproof plug

    temperature rise

    Temperature rise 10°C~15°C (20~30cm from the ground)

    color temperature


    waterproof level




    bulb torque

    3N m

    Glass outer diameter

    125 MM

    Glass bulb length

    183 MM

    Insulation resistance


    Moisture resistance

    Moisture resistant

    Water jet resistance

    don't burst

    High pressure performance

    220V can load 130% without being burned

    lamp head

    Material is nickel-plated copper

    duration of use

    10000 hours

    Light bulb

    hard glass [page] glass

  • More details