Products

+
  • image2(23).jpeg
  • image3(14).jpeg
  • image4(6).jpeg
  • image5(10).jpeg

T8- Infrared Induction Lamp Series

Long term operation consumes only 10% of the electricity used in traditional lighting, achieving the effect of "keeping the lights on and saving electricity"

Eetail Price


Weight

kg

Quantity
-
+

inventory

隐藏域元素占位

  • Detailed

    Heating radiation area

    1*2.4m (2 pieces)

    power requirement

    ≤175W (heat radiation downward)

    temperature requirement

    25~30cm from the ground, the temperature can reach 32-35℃

    temperature rise

    Temperature rise 10°C~15°C (20~30cm from the ground)

    Warm lamp height requirements

    The overall height does not exceed 12 cm (including the protective net)

    Temperature requirements on the back of the warm lamp shade

    The temperature on the back side does not exceed 60°C (the lower the better), to prevent the high temperature on the back side from igniting the PP material on the back side

    gear design

    High - Low - Off

    protection net

    A protective net needs to be installed at the bottom of the warm lamp

    cable length

    1 meter

    Tube length

    118±2mm

    Lamp Life Requirements

    ≥10000 hours

    Infrared Radiation Conversion Efficiency

    ≥60%

    High pressure performance

    220V can load 120% without being burned

    Water jet resistance

    It should not burst when it encounters cold water when it is ignited

    security requirements

    The temperature rise at both ends of the lamp tube is not higher than 185K

    waterproof level

    IPX4

    Pressure regulation

    With pressure regulating function

    a fixed way

    Use a stainless steel spring buckle (safety buckle) with a diameter of about 35mm and an inner diameter greater than 25mm for fixing (installed on the warm lamp)

    The distance between two stainless steel spring buckles is: 100mm

    Applicable to various types of underground parking lots and floors.
     

    Product Advantages
    ☑ Superior to the first generation (smart sound and light control LED lamps), avoiding unnecessary environmental noise (such as ventilators, car horns, etc.)
    ☑ Avoiding noise transmission due to inconsistent installation heights of lamps Not timely, the sound of human footsteps is too small, the aura is too high, and a series of misoperations, energy saving and use are not coordinated.
    ☑ This induction lamp adopts the current advanced thermal infrared detection sensor, built-in ambient temperature compensation circuit and power supply voltage stabilization control circuit. The entire circuit has been optimized and designed, and each component is made of high-quality, high-precision materials, with stable induction and reliable operation.
    ☑ Long warranty: 3-5 years warranty.
    ☑ Low replacement cost, low replacement labor cost, easy to use. Reduced operating costs, high return on investment, and significant cost.

     

    Features

    ☑ The 8 sensor lamps are mainly open to the underground parking lot, using imported LED light source and independent intelligent control technology, which can fully provide sufficient lighting for car owners to drive out of the underground garage quickly and safely. When there is no vehicle entering or leaving, it will automatically switch to power-saving Lighting status, providing sufficient lighting for monitoring.

    ☑ The power consumption of long-term operation is only equivalent to 10% of the power consumption of traditional lighting, so as to achieve the effect of "lighting on and saving power".
     

  • Parameter

    电性参数

    序号

    产品型号

    功率[W]

    输入电压[V]

    输出电压[V]

    输出电流[mA]

    功率因素

    电源效率

    谐波失真

    恒流精度

    1

    T8-IS120-144

    3W-18W

    85V~265V/50/60Hz

    ≤42V

    410 mA

    ≥0.95

    ≥88%

    ≤18%

    ±3%

     

     

    光学参数
    序号 产品型号 发光颜色 色调[K] 色指标目标值 显色指数 光通量[Lm]±50 照度[Lux]扩光±5 发光角度
    扩光 透明 均条纹 H=1m H=2m H=3m
    1 T8-IS120-144 正白 6000-6500K x=0.3127y=0.3291 ≥80 1800 1850 1843 / / /   120°
  • More details