• image1(31).jpeg

2835 light strip

Apply 3M adhesive on the back of the sleeve, which can be fixed with a buckle or double-sided adhesive on the back, and the installation methods are diverse.

Eetail Price






  • Detailed

    Heating radiation area

    1*2.4m (2 pieces)

    power requirement

    ≤175W (heat radiation downward)

    temperature requirement

    25~30cm from the ground, the temperature can reach 32-35℃

    temperature rise

    Temperature rise 10°C~15°C (20~30cm from the ground)

    Warm lamp height requirements

    The overall height does not exceed 12 cm (including the protective net)

    Temperature requirements on the back of the warm lamp shade

    The temperature on the back side does not exceed 60°C (the lower the better), to prevent the high temperature on the back side from igniting the PP material on the back side

    gear design

    High - Low - Off

    protection net

    A protective net needs to be installed at the bottom of the warm lamp

    cable length

    1 meter

    Tube length


    Lamp Life Requirements

    ≥10000 hours

    Infrared Radiation Conversion Efficiency


    High pressure performance

    220V can load 120% without being burned

    Water jet resistance

    It should not burst when it encounters cold water when it is ignited

    security requirements

    The temperature rise at both ends of the lamp tube is not higher than 185K

    waterproof level


    Pressure regulation

    With pressure regulating function

    a fixed way

    Use a stainless steel spring buckle (safety buckle) with a diameter of about 35mm and an inner diameter greater than 25mm for fixing (installed on the warm lamp)

    The distance between two stainless steel spring buckles is: 100mm

    ☑ High-quality ultra-bright LED light-emitting diodes are used to emit light, which has the characteristics of low power consumption, low heat generation, no glare, long life, and impact resistance. Low voltage DC 12V, 24V power supply, high safety and reliability.

    ☑ The colors are pure, soft, gorgeous and colorful, including red, yellow, blue, green, white and colorful, and various colors or changes can be customized according to requirements. The full-color effect product can be equipped with a controller, and the three colors and seven colors are interchangeable.

    ☑ Long life, with an average life of 30,000 hours, maintenance-free.

    ☑​Every six LEDs can form a loop, which can be cut off arbitrarily along the tangent line above without damaging other parts, and can be extended indefinitely, and various lengths of light strips can be customized according to customer requirements.

    ☑​​​​​​Using a very soft PCB board as the substrate, it can be docked, bent, cut and fixed on the uneven surface at will.

    ☑ ​​​​​​​​The product is light and thin, suitable for installation in narrow spaces.

    ☑ ​​​​​​​​It is composed of a printed circuit board with double-sided tape on the back for pasting and attaching to a fixed object.

    ☑ ​​​​​​​​Waterproof male and female connectors, the protection level can reach IP66, which is convenient for outdoor use.


    ☑​​​​​​​​The back of the sleeve is pasted with 3M glue, which can be fixed with buckles or double-sided tape on the back, and the installation methods are diverse.

    ☑ ​​​​​​​​​​​​​​​​Waterproof male and female connectors, higher protection level, suitable for outdoor landscape decoration.

    ☑​​​​​​​​​​​​​​Low power, high luminous efficacy, high CRI, Ra can reach 90

  • Parameter

    Strip length

    5 meters

    Number of lamp beads

    120 beads/m



    light source


    LED voltage


    Strip voltage


    light effect


    Beam angle


    Strip size

    12mm wide, 4mm high

    degree of protection


    service life




    glow color

    warm white, natural white, pure white

  • More details